User guide

Using Your SoClean 13
Using Your SoClean

Aer your inial setup, using your SoClean unit is extremely easy.
You will not need to disassemble any components to carry out
your daily sanizing.
1. Open lid.
2. Insert mask with hose
aached into chamber, and
close lid. Be sure the acrylic
sleeve is posioned in its
slot, forming a ght seal.
Close latch.
3. SoClean is now ready to
automacally operate
according to its preset me and duraon.
Please allow for the mask to remain inside the
SoClean unit for at least 2 hours following the machine
operaon, as this is part of the sanizing process.
4. Before normal use, turn on your CPAP machine and allow
it to operate approximately 15 - 20 seconds, to allow any
residual sanizing scent to be blown out.
It’s no coincidence that the clean odor you smell in connecon with
the SoClean machine is reminiscent of the way the air smells aer
a thunderstorm. The same process is at work: Acvated oxygen is
being generated.
The acvated oxygen used in the SoClean process is one of nature’s
most potent sanizing agents. It has the ability to kill bacteria,
molds, viruses, and fungi on contact. It then reverts back into the
oxygen we breathe by the end of the sanizing process.