Travel CPAP Sanitizer User Guide 2 Go
Thank You! Thank you for your purchase of the SoClean 2 Go, the world’s first portable CPAP sanitizing device. The SoClean 2 Go features the same easy, effective, and safe approach to sanitizing as the original SoClean–only now it’s completely portable. Please familiarize yourself with this manual and the operation of the unit.
Contents 1. Safety and Technical Specifications.......................................................... 4 2. Included with Your SoClean 2 Go............................................................. 5 3. Important Supplies................................................................................... 6 4. Getting Started......................................................................................... 7 5. Using Your SoClean 2 Go...........................................................
Safety and Technical Specs DANGER: Keep away from water sources including rain, bathtubs, sinks and pools. DANGER: Keep away from children. It is not a toy! DANGER: Do not use in explosive air environments, near gas vapors, or other flammables, etc. DANGER: Do not place any items on top of SoClean 2 Go Unit, particularly flammables or ignitable items. DANGER: Never place any living thing (including pets) inside. WARNING: Do not dismantle the SoClean 2 Go unit.
Included with your SoClean 2 Go SoClean 2 Go SoClean 2 Go Sanitizing Bag SoClean filter cartridge (installed) SoClean check valve assembly with injection fitting and hose (installed) 8 AA Batteries (included) Neutralizing pre-wash 5
Important Supplies Check Valve Assembly (installed) Prevents water in your humidifier reservoir from backing up into your SoClean 2 Go machine. If you can see water in the clear tube, replace the check valve assembly immediately. Replace every 6 months. Filter Cartridge (installed) This filter converts activated oxygen back into normal oxygen. Replace every 6 months.
Getting Started 1. Pre-washing Your Equipment Use two capfuls of the included pre-wash with a gallon of water to wash your CPAP equipment (mask, hose, and reservoir), and then rinse thoroughly with clean water. Note: The SoClean 2 Go uses no fluids in its operation. The pre-wash is supplied for hand washing your CPAP equipment only. 2. Installing the Injection Fitting With humidifier: Disconnect your CPAP hose from your CPAP machine.
Getting Started continued Now, connect your CPAP hose to the end of the injection fitting. Note: Different reservoirs may require different approaches to hose insertion. If you have difficulty, visit www.BetterRestSolutions.com for information on various humidifier models, or contact Better Rest Solutions directly at 1-866-501-3705. Remove small injection hose first, do not insert into CPAP machine.
Getting Started continued 9
Getting Started continued 3. Battery Installation 1. Remove the battery compartment door from the underside of the unit by pushing in the finger tab and lifting the door up and away from the compartment. 2. With the door off, turn the unit right side up and the battery pack will fall into hand. Note: The battery pack is connected to the base unit by a cable.
Using Your SoClean 2 Go The SoClean 2 Go sanitizes by pumping activated oxygen into your humidifier reservoir and through your CPAP hose. It then passes through your mask into the mask bag, where it sanitizes your mask inside and out. Finally, it exits the mask bag by passing through a filter that converts it into ordinary oxygen. All this is done without messy solutions, or the need to disassemble any of your equipment. 1.
Using Your SoClean 2 Go continued 3. Turn on the Power switch located on the underside of the unit. A Green LED will flash on the top of the unit for 30 seconds. 4. Within 30 seconds, press the button above the SoClean 2 Go logo to begin sanitizing. The LED will be solid Green. If the Start button is not pushed within the 30 seconds while the Green LED is flashing, reset the unit by turning the Power button Off and On to begin the process again.
Maintaining Your SoClean 2 Go Keep your SoClean 2 Go dust free by periodically wiping it down with a damp cloth. If the bag becomes soiled you may hand wash it and allow it to air-dry. Do not machine wash or machine dry the bag. The SoClean check valve assembly and filter cartridge should be replaced every 6 months. Visit your authorized distributor or www.BetterRestSolutions.com to purchase a Cartridge Filter Kit.
FAQs 1. Will my CPAP equipment be wet from the SoClean 2 Go? No. The SoClean 2 Go uses no fluids in its operation. It sanitizes with activated oxygen. No fluids or water are used in this process. 2. Is the SoClean 2 Go harmful to me or the environment? No. The activated oxygen it generates is always kept to a safe level. Further, a special filter converts it into ordinary oxygen as it’s released from the system. 3.
Notes
USER GUIDE For more information about SoClean 2 Go or our other innovative products, please visit www.BetterRestSolutions.com Copyright © 2014 www.BetterRestSolutions.com is a division of Inceptus, Inc. SoCleanTM is a trademark of Inceptus, Inc. Uxbridge, MA 01569-2001 Edition Rev.
