Operating instructions

19
APPENDIX
VM-92U G2 FCC FREQUENCY: 725.000~774.750 MHz
UHF Frequencies Available for Use for Home Electronics in North America
The RF radio frequencies used in the transmission of wireless information are
closely regulated in most countries including North America. A lot of countries
strictly enforce their regulations stating which RF frequencies are available for
use for certain device, so it can help limit the amount of radio frequency
interference in all wireless communications.
Please refer to the following table for MIC 1 and MIC 2 with available RF
frequencies. If the RF frequencies indicated in the following table are in conflicts
with the local wireless information law in your country, please switch to a
different product model or contact our technicians for advice.
FCC Information to User for Reference
This equipment is designed in compliance with the limits for a Class A digital
device pursuant to part 15 of the FCC Rules from the United States of America.
These limits are designed to provide protection against harmful interference
when the equipment is operated in public environment. This equipment
generates, uses, and can radiates radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area may cause harmful interference, so the user will have to correct
the interference at his/her own expense.
Appendix