Operating instructions

11
HOW TO SELECT FREQUENCY/CHANNEL FOR THE RECEIVER
Frequencies can be recorded by finding the channel of the frequency. To do so;
STEP 1: Press “SET” on the receiver to allow the “CH” text to blink. Once
blinking press “SET” again, the frequency’s channel will be displayed on a
range of 0~99.
HOW TO ADJUST SQUELCH
The SQUELCH knob on the back of the receiver adjusts the distance range
between the microphone and the receiver. Use a plastic screwdriver to make the
squelch adjustment at the button. A higher level of squelch allows the usage of
microphone further away from the receiver. However, the drawback of using a
higher level of squelch is the increased chance of interference.
AF
CH IRFRQ SCAN
RF
CH----00
MH Z
BAT
A
UP
SET
DOWN
MIC 1
UP
SET
DOWN
MIC 1
If you need to find a channel for a frequency not selected, please follow steps for
“Manual Frequency Select” then follow step 1 for “:Frequency/Channel Select”).
NOTE
ANTENNA-B ANTENNA-AMIC 2 SQUELCH
MAX MIN MAX MIN
MIC 1 SQUELCH
DC 14V
DC-POWER
MIC 2 BALANCED MIC 1 BALANCED
TRUE DIVERS ITY
MIX
MIC 1 & 2
UNBALANCED
AUDIO O UTPU T
364130911000
Model No.: VM-92U G2
CALIFORNIA, UNITED STATES OF AMERICA
www. Be tt er Mu si cB ui ld er. co m
ENGINEERED AND DESIGN IN U.S.A.
Better Music Buil der
®
®
PLASTIC SCREWDRIVER
MA X MIN
MIC 1 SQUELCH