Instruction manual

Special security product and service offers

16-10 Issue 9 May 2003

Logging in with ASG

When you begin a remote session with an Intuity AUDIX system that is

ASG-activated, the system prompts you with a challenge. To log in to a system

that has ASG activated for your login:

1. At the

The terminal screen displays the following message:

Challenge: xxxxxxx

Response:

2. Press Enter on the ASG key.

The ASG key displays the following message:

PIN:

3. On the ASG key, type your PIN and press Enter.

4. On the ASG key, type the challenge number that is displayed on the

terminal screen, and press Enter.

The ASG key displays the unique 7-digit response number that

corresponds to the challenge number you entered. The challenge and

response numbers are valid for this session only.

5. On the terminal screen, at the

Response: prompt, enter the response

number that is displayed on the ASG key.

NOTE:

If the authentication process is successful, the system displays the INTUITY

Main Menu for the

sa login or the AUDIX Command Prompt screen for the

vm login. If the authentication process fails, the system makes an entry in

the system history log and displays the message

INVALID LOGIN.

Maintaining login IDs

Once you establish an ASG login for a specific Intuity AUDIX login user, sa or vm,

anyone who attempts remote access to your system with the protected login is

prompted for the challenge response number.