Instruction manual

Securing DEFINITY systems (Release 7.2 and Later)
with Access Security Gateway
Issue 9 May 2003
16-7
Maintaining login IDs
Temporarily disabling Access Security Gateway
access for login
To temporarily disable ASG:
1. At the prompt, type
change login xxxx (xxx = alphanumeric login ID) and
press
Return to log into the Login Administration screen.
2. On page 2 of the Login Administration screen, set the
Blocked field to y.
NOTE:
Setting the Blocked field to y does not remove the login from the
system, but temporarily disables the login.
3. Press
Return to save your changes.
Restarting temporarily disabled ASG access
for login
1. At the prompt, type change login xxxx (xxx = alphanumeric login ID) and
press
Return to log into the Login Administration screen.
2. On page 2 of the Login Administration screen, set the
Blocked field to n.
3. Press
Return to save your changes.
Maintaining the ASG history log
The ASG history log logs all session establishment and rejection events
associated with users accessing the system administration and maintenance
interface through ASG. This log emulates the information provided in the
DEFINITY, MultiVantage™ Software, or Communication Manager history log, but
also contains information on whether the session was accepted or rejected by
ASG, and if rejected, the reason for the rejection.
This screen is accessible only if the
G3 Version field on the System-Parameters
Customer-Options screen is
V6 or greater and the Access Security
Gateway (ASG)
field on the screen is set to y.