Instruction manual

Administering features of the DEFINITY G3V3 and later
13-10 Issue 9 May 2003
■ Originating Extension
This is a dynamic field that is displayed only whenever the SVN
Station Security Code Violation Enabled
field is set to y.
Whenever a Station Security Code SVN Referral call is made, the
extension in this field is internally the originating extension. It has no
other significance than that it is not available for use as a normal
extension. Enter any unassigned extension containing five digits.
■ Referral Destination
This is a dynamic field that is displayed only whenever the SVN
Station Security Code Violation Notification
Enabled
field is set to y. Whenever a station security code SVN
referral call is made, it is made either to the extension (if provided) in
this field or to the attendant (if the field contains
attd). If the
destination is a station, and if the
Announcement Extension field
is set to
blank, the destination must be equipped with a display
module. Enter one of the following: an assigned extension
containing 5 digits or
attd for attendant.
■ Station Security Code Threshold
This value in this field functions in conjunction with the value in the
Time Interval field. The value in the former field indicates a
noteworthy count of invalid attempts in using station security codes
which, if exceeded within the time period indicated in the latter field,
constitutes a security violation. Whenever this occurs, a station
security code SVN referral call is made. Also, invalid attempts are
logged, but they are ignored unless the count of such attempts
exceeds the administered threshold. This is a dynamic field that is
displayed only whenever the
SVN Station Security Code
Violation Notification Enabled
field is set to y. Enter a
number between
1 and 255. Default is 10.
■ Time Interval
This value in this field functions in conjunction with the value in the
Station Security Code Threshold field. The value in the
latter field indicates a noteworthy count of invalid attempts in using
station security codes which, if exceeded within the time period
indicated in the former field, constitutes a security violation.
Whenever this occurs, a station security code SVN referral call is
made (unless this capability has been suppressed). This is a
dynamic field that is displayed only whenever the
SVN Station
Security Code Violation Notification Enabled
field is
set to
y. Enter a value from 0:01 to 7:59. The first digit represents
the hour, and the second and third digits represent the minutes.
Default is
0:03.