Instruction manual

PARTNER II Communications System
Issue 9 May 2003
6-61
PARTNER II Communications System
This section provides information on protecting the PARTNER II Communications
System.
Additional security measures are required to protect adjunct equipment.
■ Chapter 7 contains security measures to protect the attached voice
messaging system. For general security measures, refer to ‘‘Protecting
voice messaging systems’’ on page 7-2. For product-specific security
measures, refer to ‘‘PARTNER II Communications System’’ on page 7-55
.
■ Chapter 8 contains security measures to protect the Automated Attendant
feature of your communications system. See ‘‘PARTNER II
Communications System’’ on page 8-21.
The PARTNER II Communications System does not permit trunk-to-trunk
transfers, thus reducing the risk of toll fraud. In addition, it allows individual
stations to be administered for outward restriction.
An optional remote administration unit provides remote administration for all
releases of the PARTNER II Communications System. Protect the remote
administration unit by making sure to assign a password for unattended mode,
and once remote administration is not necessary, remove it from unattended
mode. Otherwise, a hacker could change the programming remotely.
PARTNER Plus Communications
System
This section provides information on protecting the PARTNER Plus
Communications System.
Additional security measures are required to protect adjunct equipment.
■ Chapter 7 contains security measures to protect the attached voice
messaging system. For general security measures, refer to ‘‘Protecting
voice messaging systems’’ on page 7-2. For product-specific security
measures, refer to ‘‘PARTNER II Communications System’’ on page 7-55
.
■ Chapter 8 contains security measures to protect the Automated Attendant
feature of your communications system. See ‘‘PARTNER Plus
Communications System’’ on page 8-22.
The PARTNER Plus Communications System does not permit trunk-to-trunk
transfers, thus reducing the risk of toll fraud. In addition, it allows individual
stations to be administered for outward restriction.
An optional remote administration unit provides remote administration for all
releases of the PARTNER Plus Communications System. Protect the remote
administration unit by making sure to assign a password for unattended mode,
and once remote administration is not necessary, remove it from unattended
mode. Otherwise, a hacker could change the programming remotely.