Instruction manual

Features for the MERLIN systems
Issue 9 May 2003
6-3
Disallowed list x x x x x x Default is List 7
Facility restriction
levels (FRLs)
x x x x x Levels 0 through 6;
ARS related
Forced entry of
account codes
x x x x x x Affects only outgoing
calls
Night service x x x x x Whenever Night
Service is on and
Shared Remote Access
is administered, calls
normally routed to
internal stations are
provided remote access
treatment.
Reliable/
unreliable
disconnect
x x x x x x “Un-reliable” setting
allows the user to dial
without system
screening if the far end
disconnects.
Remote access x x x x x Access controlled by
restrictions associated
with the barrier codes.
Remote access
kill after “n”
attempts
xx x x xxN=3
Remote call
forwarding
xxxxx
Restrict incoming
tie lines
* x x x x x MII (*) allows access to
stations only on ML;
default prohibits access
to outgoing facilities via
tie lines; access is
allowed if the tie line is
set for Remote Access,
but access is controlled
by an assigned barrier
code.
Table 6-1. MERLIN II and MERLIN LEGEND security features — Continued
Features
MII
R3
ML
R1.0/
1.1
ML
R2.0/
2.1
ML
R3.0/
3.1
ML
R4.0/
4.1/
4.2
ML
R5.0 Comments
Continued on next page