Instruction manual

Small business communications systems
6-2 Issue 9 May 2003
— ‘‘PARTNER II Communications System’’ on page 8-21
— ‘‘PARTNER Plus Communications System’’ on page 8-22
— ‘‘System 25’’ on page 8-22
Features for the MERLIN systems
The following table identifies MERLIN II and MERLIN LEGEND security features
by release number.
Table 6-1. MERLIN II and MERLIN LEGEND security features
Features
MII
R3
ML
R1.0/
1.1
ML
R2.0/
2.1
ML
R3.0/
3.1
ML
R4.0/
4.1/
4.2
ML
R5.0 Comments
Automatic route
selection (ARS)
xx x x xx
Administration
security
x x x x x 5-character password
on SPM program
Allowed list x x x x x x 2- to 11-digit code
Barrier code x x x x x x MII: one code, four
digits
ML R1/R2: 16 codes,
four digits each, default
is 16 codes
ML R3/R4/R5:
16 codes, digits
increased to 4 through
11, default is 7 digits
Dial access to
pools
x x x x x x Factory setting
specifies no users are
able to use any pool
dial-out codes
Direct inward
system access
(DISA)
NOTE: For
MERLIN Legend
systems, see
“Remote Access.”
N/A N/A N/A N/A N/A Users limited to dialing
inside users or pool/line
codes; ARS cannot be
used by DISA callers;
feature can be set for
inward access only or
full access
Continued on next page