Instruction manual

Contents
Issue 9 May 2003 11
Disable facility test calls 5-40
Suppress remote access dial tone 5-42
Disallow trunk-to-trunk transfer 5-43
Disable transfer outgoing trunk to outgoing trunk 5-44
Disallow outgoing calls from tie trunks 5-45
Limit access to tie trunks 5-45
Monitor trunks 5-46
Use terminal translation initialization 5-46
Require account codes 5-47
Assign COR restrictions to adjuncts when using
expert agents 5-48
Disable distinctive audible alert 5-48
Remove data origination code 5-48
Use world class routing restrictions 5-49
Change override restrictions on 3-way
COR check 5-50
■ Detecting toll fraud 5-50
Administration security 5-51
Logins for INADS port 5-51
Forced password aging and administrable logins 5-52
Call detail recording/station message
detail recording 5-53
Traffic measurements and performance 5-55
Monitor I 5-55
SAT, Manager I, and G3-MT reporting 5-55
ARS measurement selection 5-56
Automatic circuit assurance 5-56
BCMS measurements (Communication Manager,
MultiVantage Software, DEFINITY ECS and
DEFINITY G1 and G3) 5-58
CMS measurements 5-58
Security violation notification
(Communication Manager, MultiVantage
Software, DEFINITY ECS and DEFINITY G3) 5-59
Security Violations Measurement reports 5-62
Remote access barrier code aging/access limits
(DEFINITY G3V3 and Later) 5-67