Instruction manual

Large business communications systems
5-32 Issue 9 May 2003
NOTE:
FRLs 1 through 7 include the capabilities of the lower FRLs.
For Communication Manager, MultiVantage™ Software, DEFINITY ECS,
DEFINITY G1, G3 and System 75:
■ Use change cor to display the Class of Restriction screen.
■ Enter the FRL number (0 through 7) in the FRL field.
■ Use change route-pattern to display the Route Pattern screen.
■ Assign the appropriate FRL to the route pattern defined by ARS/WCR.
For DEFINITY G2 and System 85:
■ Use PROC010 WORD3 FIELD23 to assign FRLs to a station originator’s
COS for use with AAR/ARS/WCR trunks. (COS 31 is used for Remote
Access.)
■ Use PROC103 WORD1 FIELD2 to assign FRLs to an incoming trunk.
■ Use PROC309 WORD1 FIELD3 to assign FRLs to an ARS route pattern.
■ Use PROC321 WORD1 FIELD4 to assign FRLs to an AAR pattern.
■ On DEFINITY G2.2, use PROC318 WORD1 FIELD4 to assign FRLs on
WCR.
Table 5-3. Suggested values for FRLs
FRL Suggested Value
0 No outgoing (off-switch) calls permitted.
1 Allow local calls only; deny 0+ and 1 800 calls.
2 Allow local calls, 0+, and 1 800 calls.
3 Allow local calls plus calls on FX and WATS trunks.
4 Allow toll calls within the home NPA.
5 Allow calls to certain destinations within the continental USA.
6 Allow calls throughout the continental USA.
7 Allow international calling. Assign Attendant Console FRL 7.