Owner`s manual

12
3. PLACING THE SPEAKERS ON THE PORTABLE
STAND
The speakers can be mounted on to the optional portable
stand, (see figure below). Make sure that the mounting system
(hardware, stand, etc.) is capable of supporting four times the
weight (approximately 25 lbs per speaker) of the speakers.
Floor Stand Mounting Kit Bracket
The speaker mount bracket for floor stand is optional. You
may order it from our authorized dealers near you. Please
note that the wall mount is different from the ceiling mount.
4. HOW TO OPEN GRILL COVER
STEP : Clench fist, and then knock the upper-right side of
the cabinet with fist.
STEP : After the cabinet was knocked, the grill cover will
be loosened and there will have a small gap
between the cabinet and grill cover.
STEP : Insert a straight screwdriver into the gap, and pry
the grill cover off the cabinet with the straight
screwdriver.
PARTS FOR MAINTENANCE
For repair and maintenance, you can order the following
parts indicated with numbers below from our authorized
dealers. The following parts include:
FRONT GRILL COVER: O-6
Part Number: 360EDO6COV-R
O-6 Part Number: 360EDO6COV-W
O-6 Part Number: 360EDO6COV-BL
O-10 Part Number: 360EDO10COV-R
O-10 Part Number: 360EDO10COV-W
O-10 Part Number: 360EDO10COV-BL
CABINET: O-6 Part Number: 360EDO6CNT
O-10 Part Number: 360EDO10CNT
WOOFER (LF): O-6 Part Number: 06TP035-8
O-10 Part Number: 10LB075-U
TWEETER (HF): O-6 Part Number: 20100428
O-10 Part Number: ED4001A
CROSSOVER: O-6 Part Number: QS600ND100525048
O-10 Part Number: EGS015-42-B
1
2
3
5
4
5
CROSSOVER
1
FRONT GRILL COVER
2
CABINET
3
WOOFER (LF)
BACK VIEWFRONT VIEW
4
TWEETER (HF)
Better Music Builder
C1
12.0J 250V
MET CH
605J
MPT250
C2
(ph)2OW8ROJ
R1
(ph)2OW8ROJ
R2
EGS015-42-B
(ph)2OW8ROJ
R4
(ph)2OW8ROJ
R3
P2 P3
HI1– HI1+
HI2+
HI2–LOW–
IN+
IN–
LOW+
WOOFER TWEETER TWEETER
AMPLIFIER
O-10
CROSSOVER
20W4ΩJ
R1
10K/1W
065/60V
HI1+ HI2+HI1–
IN–
IN+
LOW–LOW+ HI2–
WOOFER
TWEETER TWEETER
AMPLIFIER
O-6
CROSSOVER
4.7J 100V
MET CH
4.7J 100V
MET CH
FRONT VIEW BACK VIEW
TOP VIEW
SPEAKER STAND
Part Number: AMS001B (Optional)
MOUNTING KIT
BRACKET
CABINET
KNOCK THE
UPPER-RIGHT
GRILL COVER
3
1
2