Owner`s manual

Better Music Builder
11
2. MOUNTING THE SPEAKER TO THE WALL
STEP : Place the wall mount panel on the wall and put
three or more screws to fasten it.
The structure of
the wall must be strong
enough to hold up to
100 pounds.
1
Mounting to Solid Wood or Wood Studs
In North America, most of the houses have 2”x4” wood studs
inside the panel walls. You may use stud finder to locate the
wood studs. Then, you can drive the screw into the wood
stud to mount the speaker bracket and hold it firmly.
PANEL WALL
2”X4” WOOD STUD
Ceiling
NOTE
This Wall Mount Bracket can be a Ceiling Mount
Bracket
Wall
6mm SCREW
2
MOUNTING KIT
Wall
Better Music Builder
3
6mm Screw
STEP : Place the wall mount panel on the top of the
speaker cabinet and put three screws to fasten it.
3
ADJUSTABLE
ANGLE
STEP : One 6-mm screw is provided for mounting kit as
indicated in the following diagram. Make sure that you use
the right kinds of screws to mount the speaker onto the wall or
ceiling which are made up of different construction materials
(i.e. wood or concrete, etc.).
2
Wall
1
8mm SCREW
CEILING MOUNT BRACKET
The wall mount bracket is optional. You may order it from our
authorized dealers near you. Please note that the wall mount
is different from the ceiling mount.
ADJUSTABLE
ANGLE (Up & Down)
ADJUSTABLE
ANGLE (Left & Right)