Owner`s manual

4
pole piece) being the other. The pole piece and back plate
are often a single piece, called the pole plate or yoke.
DFT’s Dynamic Transition Waveguides™ (DTWaveguides)
represents the latest horn technology. In addition to providing
smooth, low distortion sound, DTWaveguides delivers uniform
off-axis frequency response to every point within the intended
coverage area – not just in the horizontal and vertical planes
– resulting in superior array – ability of multiple loudspeaker
systems. PTWaveguides combine outstanding pattern control
with undistorted sound for natural music and intelligible
speech.
DFT is synonymous with portability. One can easily lift, load,
and mount the system virtually anywhere. Deep-welled,
full-size handles feature ergonomically designed grip points,
while balanced composite enclosures make the system truly
one of the lightest and easiest round reinforcement systems to
transport and set up.
HD LOUDSPEAKER
DFS-912 and DFS-915
• 12” (DFS-912) or 15” (DFS-915) professional high
performance speaker with unique LF extension technology
LF can be lower to 35Hz
• Computer stimulation design technology ensures good
frequency response and excellent phase feature
• Tweeter and full range speaker with high quality
performance
• 1 x 12“ (DFS-912) or 1 x 15” (DFS-915) professional woofer
• One compression driver with 3” magnalium diaphragm
• 60°×60° wide dispersion horn
• Independent crossover circuit provides low distortion and
interferer
• Single Amplifier Driving Mode
• Suitable for all kind of rock bar, entertainment bar, night
club, all kinds of living performance and portability.
BASS POWERED SUBWOOFER
DFS-112 SUB and DFS-118 SUB
• High output SPL and sensitivity
• 1 x 12” (DFS-112 SUB) or 1x18” (DFS-118 SUB) high power
low frequency transducer with 75mm~100mm voice coil
• Sensitivity 92dB, max SPL 123dB (DFS-112 SUB); Sensitivity
97dB, max SPL 124dB (DFS-118 SUB)
• RMS 300W, peak 1200W (DFS-112 SUB); RMS 500W,
peak 2000W (DFS-118 SUB)
• Built-in power amplifier module
• Master volume control
• XLR input and output connectors
• Built in variable crossover 80Hz~250Hz high cut
• Phase switch
• Computer aided design to optimize frequency and phase
response
• Cabinet designed for FOH use
• Suitable for use with any full range or mid/high speaker
cabinets for extended low frequency, high quality music
reproduction
• Integral 35mm pole receptacle for mounting full range or
mid/high speaker cabinet
• Powder coated grill with foam backing
• Durable Polyurethane textured base paint
SYSTEM FEATURES
2-WAY HIGH FREQUENCY SPEAKER
DFS-206 and DFS-306
• High SPL and sensitivity
• 1 x 6.5” (DFS-206) or 2 x 6.5“ (DFS-306) high power low
frequency transducer
• 1 x 1” PEI diaphragm compression driver
• Passive configuration
• 140° x 140° wide angle coverage pattern
• 1 x NL4 connector (included in package)
• Computer aided design to optimize frequency and phase
response
• Multi purpose cabinet design for FOH or monitor use
• Use as a main system with or without sub speaker
augmentation
• Suitable for speech and background music
• Flexible and easy-to-install configurations (wall, ceiling,
under balcony)
• U bracket and a top holder of speaker stand are included
in package
• Powder coated grill
• Durable Polyurethane textured base paint
Features