Owner`s manual

Adjusting the Wall Mount (NB-901)

Precise Angle

The Wall Mount allows swing adjustment, slightly loosen an

screw to make an adjustment, then re-tighten. Once you

have set up the right position, then you can use the screw to

tight it up.

Extended Wall Mount

The length of the arm for the wall/ceiling mount is 7.5 inches

without any extension. With full extension, the maximum

length of the arm is 12.5 inches. Since there are 5 drops on

the extension and each drop is 1 inch.

Part Number: NB-901 (Optional) for wall mount.

PANEL WALL

2”X4” WOOD STUD

2. MOUNTING THE SPEAKER TO THE WALL

STEP : Place the wall mount panel on the top of the

speaker cabinet and use two screws to fasten it.

STEP : Then, use four screws to hold the speaker firmly

into the wall.

The structure of the ceiling must be strong enough to hold at

least 50 pounds.

Wall

12.5 Inches

31.8 cm

Wall

ADJUSTABLE

ANGLE

NOTE

Mounting to Solid Wood or Wood Studs

In North America, most of the houses have 2”x4” wood studs

inside the panel walls. You may use stud finder to locate the

wood studs. Then, you can drive the screw into the wood

stud to mount the speaker bracket and hold it firmly.

PANEL WALL

2”X4” WOOD STUD

ADJUSTABLE

EXTENSION TUBE