Specifications

21
NetLink
™
Alternative Alarm Reporting &
VoIP Solution
NetLink Panel Modules
NL-MOD & NET-COMM
 Communicate alarms via Internet or intranet over a TCP/
IP-based network using dynamic IP addressing
 Secure transmissions over the Internet using AES128bit
encryption
 Use for primary and/or backup reporting
 NL-MOD NetLink Module can be used with any Napco
panel, from the GEMP816 to the X255 and Gemini-
Commercial (GEM-C) to securely communicate alarms,
status, supervisories, etc, pinopointed by-zone
 NET-COMM Economy NetLink Module, is similar, and
this less expensive communicator is driven directly by the
alarm panel. It supports 5 channel reporting codes, com-
municating, for example, alarms, panics, fire, telco failure,
low battery, etc.
NetLink Receiver for UL Central Station
applications:
NL-RCV-RMPCUL
 Both NetLink modules report via TCP/IP to any central
station or intranet facility with the NetLink UL Listed Re-
ceiver (model NL-RCV-RMPCUL)
 UL864/UL1610-listed advanced, rack-mounted receiver
 Interfaces with the conventional Central Station automa-
tion system
 2 Reception Modes: Automatic Mode, where alarm
signals are sent normally to the automation system for
processing -or- Manual Mode, used when direct opera-
tor interaction is desired, using the built in menu-driven
keypad-style alphanumeric interface
 For redundant/mirrored applications -Two can be simply
crossover-cable networked
 Compliances: UL864 (Control Units for Fire Protective Sig-
naling Systems); UL1610 (Central Station Burglar Alarm
Units).
NAPCO Alternative Alarm Reporting Solutions:
Internet Alarm Communications