Operating Guide

Figure 22 Figure 23

I. Putting on the ROOF COVER

1. Place the ROOF COVER over the top of the sauna. Be cautious when pulling the power cord

through the hole in the roof cover. Gently place the ROOF COVER onto the ROOF PANEL.

When the edges are aligned, screw the ROOF COVER to the roof panel. (see Figure 24)

Figure 24

J. Assembling the RADIO BOX (optional)

1. Locate the wood sides for the CD/Radio housing. There is one for the front, side, and

bottom. (see figure 15)

2. Attach “A” on side panel with “A” on bottom panel and insert screws. (see figure 16)

3. Attach “B” on front with “B” on side panel and “C” on front panel with “C” on bottom panel and

insert screws. (see figure 17)

4. Screw the RADIO BOX to the REAR PANELS. The back opening (the larger opening) on the

RADIO BOX will face the RIGHT REAR PANEL. The front opening (the small opening and

where the CD/radio is inserted) on the RADIO BOX will face the LEFT SIDE PANEL.

Figure 15 Figure 16 Figure 17