How to Guide

Solution: Check the wiring harnesses coming from the power supply located on the roof of the sauna.

Make sure the wiring harness labeled “CTRL” is connected to the power supply at one end and

connected to another wiring harness labeled “CTRL” at the other end. If this wiring harness is not

properly connected, then the sauna will show signs of having no power. Disconnect the “CTRL”

harness connection, check to make sure none of the pins are bent or pushed in, and reconnect making

sure it is snug and tight. Test the control panel to determine is the problem has been resolved. If the

problem continues, contact the manufacture for additional troubleshooting.

Solution: If your sauna is plugged in at all times and you recently had a power outage and the sauna

has not been on since the power outage, you may have experienced a power surge which may have

damaged the power supply/control box located on the roof of the sauna room. Contact the

manufacturer for additional troubleshooting.

4. CD Player Will Not Work (Optional/Not Available On All Sauna Models)

Solution: Check to make sure the lock screws on top of the radio have been removed. The CD player

will not work if the screws are not removed.