How to Guide

H. Installing the TEMPERATURE SENSOR and optional accessories

1. Enter the sauna and remove the protective covering (masking tape) from the TEMPERATURE

SENSOR. Situate the TEMPERATURE SENSOR so that it is vertical and pointing downward.

(see Figure 18)

Figure 18

Note: Some sauna models are shipped with a spare TEMPERATURE SENSOR in case the

TEMPERATURE SENSOR is damaged during transit. The manufacturer decides this

according to sauna models and packaging.

2. If your sauna comes with the optional Magazine Rack, Shelf, and/or optional Towel Rack, use

the screws provided to mount the Magazine Rack in the lower left hand side of the interior

FRONT WALL PANEL (in front of the glass window panel) and the Towel Rack to the interior

RIGHT SIDE WALL PANEL. Furthermore, use the screws to mount the shelf on either side

panels of the front panel where there are no heater panels. (see Figure 19, 20, 21 and 22)

Figure 19

Figure 20

Figure 21 Figure 22