Instruction manual

8
T.E.N.S Electrode Pads
T.E.N.S ELECTRODE PADS
Four TENS electrode pads are provided. Use these pads to relieve body aches and pains
(for example, to the knee, shoulder, back and arm). You can use the pads either by
themselves or at the same time when using the footpads. The choice is yours.
1. Place the device into the nearest electricity socket and place the device at a comfortable
distance from your chair.
2. Connect the pins on the leads to the wire on each set of body pads.
3. Before use, please ensure that the surface of the skin is free from dirt, oil, sweat, powder
and any wounds.
4. Remove the backing from the electrodes, and place them on the body parts you wish to
treat, targeting the area where you suffer muscular or joint pain. Note; the electrodes
must be used as a pair and there should be at least a 1cm space between them. Below
are illustrated examples of T.E.N.S treatment areas for pain relief.
5. Plug the other end of the lead into the electrode pad socket on the side of the device.
6. Before use, please ensure that the surface of the skin is free from dirt, oil, sweat, powder
and any wounds.
7. Join the electrode pads to the wires, and connect to the device.