Better Health Electronic Foot Massager and Circulator Instruction manual For a better way of life etter Health For a better way of life Better Health For a better way of life Better Health For a better way of life Better Health For a better way of life D3961
Better Health For a better way of life ELECTRONIC FOOT MASSAGER AND CIRCULATOR INSTRUCTION MANUAL D3961 • • • • Alleviates tired and aching legs Choice of settings that can be adjusted to suit your needs Includes four electrode pads to target specific areas of pain Includes remote control for simple operation For correct usage, read these instructions carefully and keep in a safe place for future reference.
Introduction INTRODUCTION Poor circulation is an increasingly common problem, which arises when there is limited blood flow to the legs, hands, heart and rest of the body, either due to a medical condition or the natural aging process. This decrease in circulation can lead to a cold feeling in the extremities, tired, aching/ heavy legs and swelling of the feet.
Safety SAFETY For your safe and correct use of this device, it is recommended that you read the following guides before using it. The following people must never use the foot massager • Anyone fitted with a pace maker or automatic implanted cardiac defibrillator (AICD) • Anyone that is pregnant • Anyone with deep vein thrombosis (DVT) - to avoid mobilising the clot.
Description of parts M I K J L N E G D B H A R Q P O T S 1 2 1 Connecting wire Adapter 2 Electrode Pad 5 Remote F C
Description of parts A/ Power switch B/ W orking Mode button - By pressing this button, you can select the working mode from a choice of 56. Each press of the mode button can shift it to a new mode. C/ Function Button (switch between body and sole massage). D/ A uto program Button - By pressing this button, the massager will automatically cycle through the working modes. E/ T ime control button - Press “+” to increase the working time, and “-“ to reduce the working time.
Usage Instructions USAGE INSTRUCTIONS You can operate the device directly or by using the remote controller provided. 1. Connect the adaptor to the unit and plug into the mains power supply. 2. Plug the device into the nearest electricity socket and place the device a comfortable distance from your chair. 3. Put your clean feet (it’s best to take off the socks) on the sole stimulating board, and make sure that your soles completely touch the stimulating boards. 4.
T.E.N.S Electrode Pads T.E.N.S ELECTRODE PADS Four TENS electrode pads are provided. Use these pads to relieve body aches and pains (for example, to the knee, shoulder, back and arm). You can use the pads either by themselves or at the same time when using the footpads. The choice is yours. 1. P lace the device into the nearest electricity socket and place the device at a comfortable distance from your chair. 2. Connect the pins on the leads to the wire on each set of body pads. 3.
Maintenance 8. R emove the backing from the electrodes, and place them on the body parts you wish to treat. Note; the electrodes must be used as a pair and there should be at least a 1cm space between them. 9. P ress the “FUNCTION” button until the “body” LED icon flashes. Then press the body intensity button to +/- buttons to increase or decrease the intensity level. You should set the intensity so that you can feel the pulses, but remain comfortable. 10.
F.A.Q FREQUENTLY ASKED QUESTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Should I bathe before using? Not necessary, but it is a good hygienic habit to wash the feet before use. What level of intensity should I use? There is no fixed intensity level to follow as each individual has a different level of electrical resistance. You should adjust the intensity to a level until you feel comfortable. Will I get the best result from the highest intensity? Not necessarily.
F.A.Q time and frequency. This side effect will automatically disappear when the adjustment phases it over. 15. Is the device safe for everyone? People with a pacemaker, deep vein thrombosis or are pregnant must not use this device. Patients with heart disease, a malignant tumour, or who have just been operated on should seek medical advice before using the device.
Troubleshooting Problem Device is on (lights illuminated on the LCD display) but can’t feel the electrical stimulation through footpads Possible cause Solution The device is not being used correctly. Check corrective action procedure. We call it “The hand test”. Test the device by placing both bare hands at the same time on each of the foot pads (left hand on the left pad, right hand on the right pad). Increase the “SOLE” intensity up in increments until you can feel the stimulation.
Guarantee IMPORTANT Please do not return this product without first calling the Customer Service number below: 0871 911 7003 Thank you for purchasing this product, which has been made to demanding high quality standards and is guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This guarantee does not affect your statutory rights.
