Owner Manual

Be-AP 16 Compact Air Purifier
**User Manual**
Thanks for buying our product , please read the manual before use .
If there are any questions or concenrns , please contact us at [e-mail]
Product Description And Features
The compact air purifier’s high-quality fan produces more power with
less noise, making it a great way to remove harmful pollutants or irritants
in the air to improve your health. Our Compact Air Purifier is easy to
operate. With just the touch of a button, you can switch to three different
fan modes for preferred wind speed. The amount of pollutants filtered is
based on the filter you purchase. If a primary filter is purchased, the
purifier can filter floating particles such as pet hair, smoke, pollen, and
dust. A true HEPA filter can eliminate pollen, dust, mold, bacteria, dust
mites, common smoke, lead dust and pet dander. A high-efficiency
HEPA-13 medical grade filter can filter particles as small as 0.1 microns
including all previously mentioned pollutants as well as asbestos, paint
pigment, insecticide, anthrax, carbon dust, all bacteria, tobacco smoke,
and virus carriers. Filter purchase is based on consumer preference;
however, we recommend the HEPA-13 medical grade filter for highest
efficiency. Our USB power supply gives you multiple power options for
your convenience.
Features
1．The primary filter can filter floating particles such as hair, pollen, and
dust in the air.
2．The high-efficiency filter(HEPA) can filter fine particles e.g
microorganisms, viruses and PM2.5 as small as 0.3um.
3．With high efficiency activated carbon material filter to efficiently
adsorb formaldehyde, benzene and other toxic and harmful gases.
4．With high quality fan,more powerful but less noise.
5．One-button switching of multiple working modes,simple operation.
With colored led wind speed Indicator,easy to know about the wind
speed.
6．Connect to DC 5V power supply with USB cable, makes it more
convenient to use.
7．Starting on the car power supply,the product will start automatically,
eliminating tedious operations.
8．Design for car cup holder, easy to use and install.
Warning
1.Do not use around liquids such as water or flammable solvents when
product is running.
2.To clean the air purifier, make sure the product is turned off and use a
soft cloth to wipe clean.
3.Do not cover product when it is turned on. Close all windows or fresh
air sources to improve purification.
4.This product is NOT a toy, please keep away from children.
5.Do not open the product cover when it is turned on.
6.If using in a vehicle: and air-conditioning is on, turn to the lowest
air-conditioning setting to improve purification. Make sure the purifier is
firmly placed in cup holder and not on the dashboard. Do not adjust
product while driving to avoid any accidents.
7.We do not assume responsibility for damage or accidents caused by
improper installation and/or use of power cord.
Product Structure Package Included
Car Air Purifier * 1
USB Cable * 1
User Manual * 1
How To Install
Please place it at car’s cup holder, DO NOT place it on dashboard.
Connect the car power source to the product with the USB cable line.
1．Plug one end of the USB cable into the
USB interface of the purifier (Figure 1)
2. Connect the another end of USB cable to the power source
(Figure 2)
（Figure 1）
(Figure 2)
How To Use
Filter Information
1.Connect purifier with the USB cable to any USB compatible power
source.
2.Power source must be on for the purifier to function, if using purifier in
vehicle, the vehicle must be on.
3.Press once to activate blue light primary purification, press twice to
activate yellow light rapid purification, press three times to activate red
light high efficiency purification.
To turn purifier off, press and hold for approximately 3 seconds.
The filter on average will last 3 to 6 months based on usage and
environment. For best performance, we recommend replacing the filter
every 3-5 months. A red warning light will flicker and beep 3 times when
the filter needs to be replaced. See filter replacement instructions.
Regular filters can be used, but HEPA-13 filter must be used for purifier
to be considered medical grade.
How To Replace The Filter
1．Make sure the purifier is powered off, then rotate the base
counterclockwise to loosen.
（Figure 1）
2．Once base is detached, remove filter from the middle section and
replace with new filter (please see Product Description for filter
replacement recommendation)（Figure 2）
（Figure 2） （Figure 3）
3．Rotate the base clockwise to reattach purifier and ensure that it is
firmly secured （Figure 3）
Troubleshooting
Specificationoting
1.Unable to start: please confirm that the 5V power supply is securely
connected, if the USB cable is connected to a power outlet make sure
the power source is on, when using in a vehicle make sure the vehicle
is on.
2.Disclaimer: the air purifier is meant to remove pollutants and other air
particles. It is not meant to remove built up odors as these odors are
attributed to many factors. The product can purify the air significantly;
however, if the odor stems from a source other than air pollutants, the
product cannot eliminate the odor. To reduce the odor turn the product
on the red light, high efficiency purification mode.
Voltage DC5V
Maximum power ≤3W
Applicable space ≤3m³
Maximum air volume 15CFM
Maximum noise ≤52dB
Product Size Ø68.4 ×174 mm
Content
Product Description and Features
Features
Warning
Product Structure
Package included
How To Install
How to use
Filter Information
Troubleshooting
Specificationoting
Catalog
1
2
3
4
5
6
7
8
8
9
11
4 5 61
7 8 9 10 11
2 3