Product Manual

3
Figure 4
To Dispense Fluid
1. Remove the nozzle from its holder and insert into
the receiving tank of the equipment or vehicle.
2. Choose a handle setting for the desired owrate:
• 1/4-gallon setting for low-volume, low-resistance
pumping
• 1/2-gallon setting for high-volume, high-resistance
pumping
3. To operate pump, manually move the handle in a
push/pull motion.
4. After dispensing the desired amount of uid, drain
the hose and nozzle. Place the nozzle in its holder
and return the handle to its upright storage position.
During daily use, the GPI HP-100 Hand Pump is es-
sentially maintenance free. However, the pump should
be inspected periodically for signs of leakage. If leaks
are present, make appropriate repairs. Refer to the
Troubleshooting section.
NOTE: Lock the handle to the pump by pushing the
handle against the pump and inserting a padlock
through either of the top holes in the handle and
through the pump’s lock hole. (Figure 4)
OPERATION & MAINTENANCE