Installation Instructions

●
Move thedirectionjoystick towards eitherdirection . T hemotorwill spin ,andthe
quadcopter willreverse;
●
Move switch SD down to turn off turtlemode;
●
Now we can arm the quadcopter and it will flynormally;
Turtlemodeissuitableforflatgroundandit’snotrecommendedtoactivatethismodeongrassorfabricsasthe
motormaybeobstructed,resultingindamageofthemotorsandESC.
Re-bindforQuadcopter
Ifquadcopterandremotecontrolradiotransmittercannotbeconnectedsuccessfully,the
pilotmayneedtore-bind.Thiscanhappenwhenreplacingnewelectronicpartsofthe
quadcopterduringmaintenanceorupgradingtheremotecontrolradiotransmitter.The
stepsareasfollows.
●
Poweronthequadcopterandwaitforitssystemtoloadcompletely.