Installation Instructions

ThequadcopterStatusLEDlightisnormallysolidbluewhenflying.Thiscanbechangedto
colorcycling:
●
Inthe-MAIN-menu,selectCONFIGandenterthe-CONFIG-menu , as shown
below.
●
SelectLED,selectOFF(forsolidblue)orON(forRGBcolorcyclingeffect).
●
SelectBACKtoexitCONFIGsub-menu.
●
SelectSAVEintheMAINmenutosavechangesandexittheOSD.
OSDFlightInformation
Pilotcancustomizetheinformationdisplayedonthein-flightOSDincluding:
receivermode,flightmode,andbatteryvoltage.
●
Inthe-MAIN-menu,selectLAYOUTandenterthe-LAYOUT-menu , as shown
below.