User`s manual

3-16 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
3
Converting From DIN-Rail Mounting to Panel Mounting
The following parts are used in either the DIN-rail or Panel mount assembly options. The
auxiliary terminal board is shipped configured for DIN-rail mounting. The instructions in this
section guide you in converting the board to its panel mounting optional configuration.
The following table and drawings describe the various plastic parts which make up the auxiliary
terminal board assembly and shows a side view of the board configured for DIN-rail mounting.
Table 3-6. Auxiliary Terminal Board Components
Phoenix Contact Part Number Description Quantity
UM45 Profil 105.25 PCB Carrier 1
UM 45-SEFE with 2 screws Side element with Foot 2
UMK 45-SES with 2 screws* Side Element 2
UMK-BF* Mounting Ear 2
* Parts shipped with auxiliary terminal board for optional panel mounting.
Figure 3-8. Auxiliary Terminal Board Assembly Drawings
6
1
1
21
45
UM 45-SES
1
0
2
1
4
5
U
M 45-SEFE
105.25 +0.25