User`s manual

2-28 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
2
Either method will start the Hardware configuration tool. The default hardware configuration
screens are for the VersaMax product. As such, the first operation we need to perform is to select
the Series 90-30. To perform this action select File from the main menu (menu bar), Convert T
o
from the File menu, and Series 90-30 from the Convert To menu. This will change the VersaMax
default to a Series 90-30. The menu selections are as shown in Figure 2-21.
Figure 2-21. Hardware Configuration Rack Selection
A dialog box will appear that warns the user that information will be deleted. The folder that we
created for the example is new, as such no information will be lost.
If you have not created a new
folder, be aware that configuration information will be lost by performing this operation.
It
is recommended that you use a new “scratch” folder for this example. Answer Yes to the dialog
box. (Figure 2-22)
Figure 2-22. Hardware Configuration Rack Convert Dialog Box
Once this operation is complete, we have a blank 90-30 rack that requires configuration. The
resulting Hardware Configuration screens should be as shown in Figure 2-23.