User`s manual
Preface
iv Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
Chapter 15. Using VersaPro with the DSM314:
Describes basic operations in VersaPro
pertaining to the DSM314, such as accessing the Motion and Local Logic editors, saving programs,
printing hardcopies, and storing configuration and programs to a PLC.
Chapter 16: Using the Electronic CAM Feature:
Describes electronic CAM concepts,
commands, and programming methods.
Appendix A. Error Reporting:
Describes the errors reported by the module status code and axis
error code words in %AI memory.
Appendix B. Parameter Download Using a COMM_REQ:
Describes how to use the
COMM_REQ instruction for (1) loading Parameter data from the PLC to the DSM314, and (2) for
transferring data between the DSM314’s User Data Table and PLC memory.
Appendix C. Position Feedback Devices:
Provides information needed to use Fanuc serial
encoders and incremental quadrature encoders with the DSM314.
Appendix D. Startup and Tuning a GE Fanuc Digital Servo System:
Provides a procedure for
starting up and tuning a GE Fanuc digital servo system.
Appendix E. Local Logic Execution Time:
Contains information required to determine a Local
Logic program’s execution time.
Appendix F. Updating Firmware in the DSM314:
Describes the procedure for updating
firmware in Flash memory in the DSM314
.
Appendix G. Strobe Accuracy Calculations
. Discusses strobe position accuracy considerations
and calculations.
Related Publications
For related information, refer to the following publications:
Series 90™-30 Programmable Controller Installation Manual:
GFK-0356
Installation Requirements for Conformance to Standards:
GFK-1179
α
Series Servo Amplifier (SVU) Descriptions Manual:
GFZ-65192EN
Control Motor Amplifier
α
Series
(SVM):
GFZ-65162E
α
Series Servo Motor Manuals
: GFZ-65165E, GFZ-65150E, GFZ-65142E
β
Series Servo Product Specification Guide
: GFH-001
SL Series Servo User’s Manual;
GFK-1581