User`s manual

Strobe Accuracy Calculations

GFK-1742A Appendix G Strobe Accuracy Calculations G-5

Note that the formulas above assume constant acceleration throughout the sampling period.

The formulas for determining the error for the cases where acceleration is not constant during

the sampling period are too complex for the context of this manual.

Note that an additional error as much as 10 microseconds (or the number of degrees or position

counts that can occur in 10 microseconds) may also be seen due to input filtering/sampling

delays in the hardware.

Warning

Note that user wiring and the type of device used for the strobe input may

also cause inaccuracies in the strobe value.