User`s manual

Using the Electronic CAM Feature
GFK-1742A Chapter 16 Using the Electronic CAM Feature 16-43
16
In this example, the Local Logic program will control CTL01 and CTL08. CTL01 and CTL08 are
used to signal the Motion Programs; so, we need to configure these CTL bits to be under Local
Logic Control. To do this, access the CTL Bits tab in the VersaPro hardware configuration. Select
“CTL01 Config” and choose Local_Logic_Controlled. Repeat the procedure for CTL08. The
resulting Hardware Configuration screens are shown in Figure 16-33.
Figure 16-33. Hardware Configuration 90-30 rack DSM314 CTL Bits Tab