User`s manual

Using the Electronic CAM Feature
GFK-1742A Chapter 16 Using the Electronic CAM Feature 16-29
16
Figure 16-19. Rename Profile
Step 4: Link the CAM Profile to the CAM Block
•
CAM Profiles must be linked to their associated CAM block. A CAM block can contain
numerous CAM profiles. The DSM has two limits that affect the number of profiles. The
maximum CAM block size is 50K, and the maximum number of linked profiles for an
individual block is 100. The CAM Profile library is only limited by available disk space
on the host computer. The CAM block is then linked to the DSM via the CAM Block
entry in Hardware configuration.
Although there is more than one way to link a CAM profile to a CAM block, the easiest
method is simply to click the desired CAM profile, then drag it and drop it on the
applicable CAM block. The result is shown in the next figure.
Note
VersaPro 1.50 limits the download block total size (Motion, Local Logic, and
CAM combined) to 32K.