User`s manual

16-28 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
16
Figure 16-18. New Profile Creation
You can then rename this profile to a name more suitable to the application if desired. The naming
rules are:
•
Any alpha-numeric character or the underscore ( _ ) symbol may be used.
•
The first character in a profile name must be a letter.
•
A profile name cannot be more than 20 characters long.
•
A profile is referenced by name in a VersaPro motion program. NOTE: VersaPro is not
case-sensitive when referencing a profile name.
One method to rename the profile is to right-click the profile name in the Navigator window and
choose Rename Profile (Figure 16-19) from the short-cut menu. Type a name for the profile and
press ENTER to finish. The profile and any CAM profile links to it are renamed. For this
example, we will rename the profile to ExCamProfile. Reference the on-line help for additional
information.