User`s manual

Using the Electronic CAM Feature
GFK-1742A Chapter 16 Using the Electronic CAM Feature 16-27
16
Step 3: Create a CAM Profile
The next step is to create a simple CAM profile in the CAM editor. The CAM Editor has a CAM
profile library that is created by the user. The CAM profiles within the library are then linked to
the CAM blocks. Additional information on this interlinking is contained within the on-line help.
For our example we must first create a profile in the library. One method to perform this step is to
right-click the “CAM Profiles” icon in the Navigator window. The short-cut menu appears. Select
New Profile as shown in Figure 16-17.
Figure 16-17. Create New CAM Profile
This will insert a new profile into the library named “profile1” as seen in Figure 16-18.