User`s manual

16-26 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
16
Figure 16-15. Create New CAM Program
Enter the data in the “Create New CAM Program” box, then click the OK button to create the
CAM Block. This will prompt VersaPro to launch the CAM editor program. (Figure 16-16)
Figure 16-16. Initial CAM Editor with InfoViewer Screen
The CAM Editor contains extensive on-line hypertext help. This manual only attempts to
introduce some of these concepts. It does not try to cover all the editor features, so it is strongly
suggested that you review the programming software’s on-line material.