User`s manual

Using the Electronic CAM Feature
GFK-1742A Chapter 16 Using the Electronic CAM Feature 16-23
16
6. Specify the CAM Type
7. Specify the Correction Property
8. Save the CAM profile
9. Generate motion and Local Logic programs
10. Set up hardware configuration in VersaPro
11. Execute (test) the application
Step 1: Create a New Folder
You should begin by opening VersaPro. The method required to do this is described in Chapter 15
of this manual, in the VersaPro on-line help, and in the VersaPro manual, GFK-1670. Once
VersaPro is open, you should create a new folder by opening the
File
menu choosing the
New
Folder
submenu. A dialog box will appear that allows you to create a new folder. For this
example, name the folder “CAMExample,” as shown in Figure 16-12.
Figure 16-12. New Folder Wizard page 1
Clicking the next button will cause VersaPro to prompt whether you wish to create the directory (if
it does not exist). Once the folder has been created, the following dialog box will appear that
offers several choices for the source for the new folder. In our case, we want to start with an empty
folder, which is the default (reference Figure 16-13).