User`s manual

Using VersaPro with the DSM314

GFK-1742A Chapter 15 Using VersaPro with the DSM314 15-15

Accessing the Local Logic Editor Screen

Both the Motion Editor and Local Logic Editor are accessed from VersaPro’s Folder Browser

window. However, once created and saved, motion programs and Local Logic programs become

part of the PLC CPU Hardware Configuration and are Stored to the PLC with the other

configuration information.

•

On the Main LD screen, click File on the Menu bar, then select New Motion. Then, on the

side menu, click Local Logic Program.

Figure 15-21. Creating a New Local Logic Program

The Create New Local Logic dialog box will appear.

Figure 15-22. Create New Local Logic Dialog Box

•

Type the Local Logic program Name and Description, then click the OK button (leave the

Motion Module Type box set at its default DSM314 setting). A window for the new Local

Logic program block will open. As shown in the next figure, the window title is based upon

both the folder name, Test102 in this case, and Local Logic program name, Part1LL in this

case. The Local Logic program in this example could not be called “Part1” because that name

had already been used as the Motion Program block name. Notice also in the next figure that

an icon for the new motion program, called “Part1LL – LL” (Local Logic), appears in the

Folder Browser window on the right side of the screen.