User`s manual

Using VersaPro with the DSM314
GFK-1742A Chapter 15 Using VersaPro with the DSM314 15-11
15
Using the Motion Editor
Accessing the Motion Editor Screen
Both the Motion Editor and Local Logic Editor are accessed from the VersaPro Folder Browser
window. However, once created and saved, motion programs and Local Logic programs become
part of the PLC CPU Hardware Configuration and are Stored to the PLC with the other
configuration information.
•
On the Main LD screen, click File on the Menu bar, then select New Motion. Then, on the
side menu, click Motion Program (see next figure).
Figure 15-15. Creating a New Motion Program from the File Menu
•
The Create New Motion Program dialog box will appear.
Figure 15-16. The Create New Motion Program Dialog Box
•
Enter the motion program Name and Description, then click the OK button (leave the Motion
Module Type box set at its default DSM314 setting). A window for the new motion program
block will open. As shown in the next figure, the window title is based upon the folder name,