User`s manual

Using VersaPro with the DSM314

GFK-1742A Chapter 15 Using VersaPro with the DSM314 15-9

Connecting to and Storing Your Configuration to the PLC

Note

You cannot store your configuration file to the PLC from within the

configurator program. You must be on VersaPro’s Main LD screen in

order to store to the PLC.

Useful Tool Bar Icons

Several toolbar icons will be used in the next several steps to initiate such operations as Connect,

Stop the PLC, and Store. The following figure identifies these toolbar icons:

1. Connect

2. Disconnect

3. Store to PLC

4. Load from PLC

5. Verify with PLC

6. Run PLC

7. Stop PLC

8. Toggle a Reference

9. Override a Reference

10. Write a Value to a Reference

11. View PLC Status

Figure 15-11. VersaPro Toolbar Icons

Connecting to the PLC

•

On the main VersaPro screen, click the Connect icon on the Toolbar. The Connect dialog box

will appear.

Figure 15-12. The Connect Dialog Box

7 9