User`s manual

15-8 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
15
•
When finished configuring the module, click the DSM314 configuration window’s close
button (the button in the upper right corner of the configuration window with an X) to return to
the “Rack View.” At this point, your configuration settings are not yet saved to disk. They
only reside in your computer’s volatile RAM memory.
Saving Your Configuration Settings to Disk
•
Click File on the Menu bar, then click Save on the drop-down File menu. The configuration
settings will be written to the applicable file in your program folder. Once a file is saved, the
Save selection on the Menu file becomes inactive (it changes from black to a light green
color). If you make any further changes to the configuration, the Save selection on the File
menu will return to its active state (and its color will change back to black).
•
After saving your configuration file, click File on the Menu bar, then click Exit to return to the
Main LD screen.