User`s manual

15-6 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
15
Configuring the DSM314
The following information disusses configuring the DSM314. For configuring other hardware,
please refer to the
VersaPro User’s Guide
, GFK-1670, and the VersaPro on-line help.
•
With the Configuration window open, as shown in the previous figure, double click the empty
slot where the DSM314 is to be installed. You will see a Module Catalog window appear with
a list of module categories:
Figure 15-8. Module Catalog Widow for Hardware Configuration
•
Click the Motion tab to access a list of motion module choices:
Figure 15-9. Motion Tab for Hardware Configuration