User`s manual

15-4 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
15
Starting the Configuration Process
The configurator is actually a separate program that you can launch from the Main screen (shown
in the previous figure). To begin, double click the Hardware Configuration icon
to launch the HWC (Hardware Configuration) program. The HWC screen may
appear as a window in or on top of the VersaPro Workbench, as shown below. If so, click the
Expand button to expand it to full size. (You may also have to click the Expand Button in the
smaller window to expand it also.)
Figure 15-5. The Hardware Configuration (HWC) Startup Screen
The Configuration Window will expand to its full size:
Figure 15-6. The Expanded Hardware Configuration Screen
Border
E
xpand Button