User`s manual

GFK-1742A 15-1
Using VersaPro with the DSM314
Getting Started
Note: VersaPro Version 1.1 or later is required for use with the DSM314
. This document
discusses how to start the VersaPro software and use it to access the DSM314 configuration,
motion programming, and Local Logic programming screens. It does not tell you specifically
what values to configure, or what commands to use in motion or Local Logic programs. That
information is covered elsewhere in this manual. Additional VersaPro information can be found in
the
VersaPro Programming Software User’s Guide
, GFK-1670, as well as in VersaPro’s on-line
help screens.
Starting VersaPro
Double click the VersaPro icon on your Windows desktop to start the software running. VersaPro
will start with a blank screen called the “Workbench.”
Figure 15-1. VersaPro Startup “Workbench” Screen
15
Chapter