User`s manual

14-4 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
14
CTL01-CTL24 Bit Configuration Selections
Each of the bits CTL01-CTL24 are individually configurable. CTL17-CTL22 default to the %Q
digital output control bits for axis 1 - axis 3. CTL23-CTL24 default to Fast Backplane Status
Access (FBSA) write bits 1-2. The configuration choices are shown in the following table.
Table 14-2. CTL Bit Configuration Selections
CTL Bits Allowed Configuration
Values for Bit Source
Description
CTL01-CTL24 IN9_A Overtravel (+) Axis 1
IN10_A Overtravel (-) Axis 1
IN11_A Home Switch Axis 1
IN9_B Overtravel (+) Axis 2
IN10_B Overtravel (-) Axis 2
IN11_B Home Switch Axis 2
IN9_C Faceplate 24v Input Axis 3
IN10_C Faceplate 24v Input Axis 3
IN11_C Home Switch Axis 3
IN9_D Faceplate 24v Input Axis 4
IN10_D Faceplate 24 v Input Axis 4
IN11_D Faceplate 24 v Input Axis 4
Strobe1 Level Axis1 Input Strobe1 Level Axis 1
Strobe2 Level Axis1 Input Strobe 2 Level Axis 1
Strobe1 Level Axis2 Input Strobe 1 Level Axis 2
Strobe2 Level Axis2 Input Strobe 2 Level Axis2
Strobe1 Level Axis3 Input Strobe 1 Level Axis 3
Strobe2 Level Axis3 Input Strobe 2 Level Axis 3
IN5_D Faceplate 5v Input Axis 4
IN6_D Faceplate 5v Input Axis 4
Local Logic Write CTL bit under Local Logic control
Local Logic Active Flag Local Logic Program Active
FBSA Write Bit 1 Serial Non-Acknowledge Protocol (FBSA) Bit 1
FBSA Write Bit 2 Serial Non-Acknowledge Protocol (FBSA) Bit 2
FBSA Write Bit 3 Serial Non-Acknowledge Protocol (FBSA) Bit 3
FBSA Write Bit 4 Serial Non-Acknowledge Protocol (FBSA) Bit 4
%Q bit Offset 12 CTL09 Program Control
%Q bit Offset 13 CTL10 Program Control
%Q bit Offset 14 CTL11 Program Control
%Q bit Offset 15 CTL12 Program Control
%Q bit Offset 24 Faceplate 24v Output Control Axis 1 (OUT1_A)
%Q bit Offset 25 Faceplate 5v Output Control Axis 1 (OUT3_A)
%Q bit Offset 40 Faceplate 24v Output Control Axis 2 (OUT1_B)
%Q bit Offset 41 Faceplate 5v Output Control Axis 2 (OUT3_B )
%Q bit Offset 56 Faceplate 24v Output Control Axis 3 (OUT1_C)
%Q bit Offset 57 Faceplate 5v Output Control Axis 3 (OUT3_C)