User`s manual

GFK-1742A 14-1
Local Logic Configuration
CTL Bit Configuration
The VersaPro programming environment allows the user to configure the input source for CTL bits
(CTL01-CTL24) using the Hardware Configuration screen. From the Hardware Configuration
screen, select the DSM314 module you wish to configure. Reference chapter 10 for the correct
menu/toolbar button sequence to access Hardware configuration. The DSM314 configuration
screens contain a tab called CTL Bits. Selecting this tab results in a display similar to the one
shown in Figure 14-1.
Figure 14-1. CTL Bits Configuration Dialog Box
The configuration screen allows the user to select the CTL bit configuration that corresponds with
the Motion Program and Local Logic program. The sections that follow provide additional
information concerning the CTL bit configuration process.
14
Chapter