User`s manual

13-8 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
13
Table 13-4. Axis 4 Variables
Local Logic Variable Name
Size
FacePlate I/O
Strobe1_Level_4 Read Only Bit Operand
Strobe2_Level_4 Read Only Bit Operand
Positive_EOT_4 Read Only Bit Operand
Negative_EOT_4 Read Only Bit Operand
Home_Switch_4 Read Only Bit Operand
Digital_Output1_4 * Write Only Bit Operand
Digital_Output3_4 * Write Only Bit Operand
Analog_Input1_4 Read Only Signed 16 Bits
Analog_Input2_4 Read Only Signed 16 Bits
*
Note
: These Digital Outputs must be configured for Local Logic control in VersaPro Hardware
Configuration, in order to be writeable by Local Logic.
Note
For Axis 4, the DSM314 Version 2.0 only supports the variables in Table 13-4.
Table 13-5. Global Variables
Overflow
(1)
Read / Write Bit Operand
System_Halt
(1)
Write Only Bit Operand
Data_Table_Ptr
(2)
Read / Write 13 Bits
Data_Table_sint
(2)
Read / Write Signed 8 Bits
Data_Table_usint
(2)
Read / Write Unsigned 8 Bits
Data_Table_int
(2)
Read / Write Signed 16 Bits
Data_Table_uint
(2)
Read/ Write Unsigned 16 Bits
Data_Table_dint
(2)
Read / Write 32 Bits
Module_Error_Present Read Only Bit Operand
New_Configuration_Received Read Only Bit Operand
First_Local_Logic_Sweep
(1)
Read Only Bit Operand
Module_Status_Code Read Only Unsigned 16 Bits
CTL_1_to_32
(3)
Read Only 32 Bits
P000-P255 Read / Write 32 Bits
D00-D07
(4)
Read / Write 64 Bits
Notes:
(1)- Refer to the Section on “Local Logic System Variables”.
(2)- Refer to the Section on “Local Logic User Data Table”.
(3)- The
CTL_1_to_32
variable can be used to read all 32 CTL bits into a register.
(4)- Refer to the Section on ”Double Precision 64 Bit Registers”.