User`s manual

Product Overview
GFK-1742A Chapter 1 Product Overview 1-13
1
Cables to connect the SVU Amps to the DSM314 and to the motors are available in various
lengths.
Refer to publication GFH-001,
Servo Product Specification Guide
for more information about the
α
Series servo products.
α
Series Servo Motors
The
α
Series of servomotors incorporate design improvements to provide the best performance
possible. Ratings up to 56 Nm are offered. These motors are up to 15% shorter and lighter than
the previous
S
Series of servomotors. New insulation on the windings and an overall sealant
coating help protect the motor from the environment.
The standard encoder supplied with the motor is a 64K absolute unit. Holding brakes (90 Vdc)
and IP67 sealants are options. The
α
Series servomotors are approved to conform to international
standards for CE (EMC and Low Voltage), IEC and UL/CUL. The following table indicates a
sample of the
α
Series motors available (some
α
L,
α
C,
α
HV, and
α
M also available).
For more information refer to Chapter 4 of this manual
,
“Configuring the DSM314,” under the
section labeled “Motor Type.” See also, the following publications:
•
GFH-001,
Servo Products Specification Guide
•
GFZ-65142E,
α
Series AC Motor Descriptions Manual
Table 1-1. Selected
α
Series Servo Motor Models
α
Model
Number
Torque
Nm
Output
KW
Max. Speed
(RPM)
α
1 1 0.3 3000
α
2 2 0.4 2000
α
2 2 0.5 3000
α
3 3 0.9 3000
α
6 6 1.0 2000
α
6 6 1.4 3000
α
12 12 2.1 2000
α
12 12 2.8 3000
α
22 22 3.8 2000
α
22 22 4.4 3000
α
30 30 3.3 1200
α
30 30 4.5 2000
α
30 30 4.8 3000
α
40 38 5.9 2000
α
40/Fan 56 7.3 2000