User`s manual

10-32 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
10
Figure 10-32. Hardware Configuration Rack Selection
A dialog box will appear that warns the user that information will be deleted. The folder that we
created for the example is new, as such no information will be lost. If the user has not created a
new folder then they need to be aware that configuration information will be lost by performing
this operation. It is recommended that you use a new “scratch” folder for this example. Answer
Yes to the dialog box. (Figure 10-33)
Figure 10-33. Hardware Configuration Rack Convert Dialog Box
Once this operation is complete, we have a blank 90-30 rack that requires configuration. The
resulting Hardware Configuration screens should be as shown in Figure 10-34.