User`s manual

10-28 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual

–

January 2001 GFK-1742A

Figure 10-28. VersaPro Local Logic (LLExample)

At this point, the user needs to check the program to verify correct language syntax. The language

syntax verification is done by selecting from the main menu Folder then the submenu C

heck Block

‘LLExample’. This causes the syntax check routines to run on the specified Local Logic program.

Note: The user can also select Check All which will cause all the blocks within the folder to be

checked. (Reference Figure 10-29)