User`s manual

1-8 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual

–

January 2001 GFK-1742A

Servo Drive and Machine Interfaces

The servo drive and machine interface is made through a 36-pin connector for each axis. This

interface carries the signals that control axis position such as the Pulse Width Modulated

(PWM)

signals to the amplifier,

Digital Serial Encoder Feedback signals or Analog Servo Command and

Quadrature Encoder Feedback. Also provided are

Home Switch

and

Axis Overtravel

inputs as

well as general purpose PLC inputs and outputs.

Standard cables which connect directly to custom DIN rail or Panel mounted terminal blocks

simplify user wiring, and are available from GE Fanuc. The terminal blocks provide screw

terminal connection points for field wiring to the DSM314 module. Refer to chapter 3, "Installing

and Wiring the Motion Mate DSM314" for more information concerning the cables and terminal

blocks used with the DSM314 module.